Jemar Norpower AS
|
 |
Skrevet: 21.06.2010
Streamer winches, Bow winches
Streamer winch
2 off Winch type 2-KA-1,5/1200-AHB in aluminium and stainless/acid proof steel
Two drums in-line in one winch frame.
Common centre bearing pedestal prepared for 15t SWL Henriksen hook installation in
centre of winch frame for safe lifting of vessel.
Automatic hydraulic brake.
Brake can also be released by means of hydraulic accumulator.
Hand rails for protection of falling into drum.
Towing point in centre bearing pedestal for 3,5 tonnes SWL towing.
Driving gear fitted internal in each drum at each side of winch.
Hyd piping internally at winch from each winch drive to common manifoil at centre,
forward of winch frame
Drum dimensions:
| D = |
1900 mm |
| d = |
1200 mm |
| L = |
360 mm x 2 |
Drum capacity 150m 60mm cable.
Bow winch:
2 off Winch type 1-KA-2,6-AHB-AL
in aluminium and stainless/acid proof steel.
Automatic hydraulic release of brake.
Brake can also be released by means of hydraulic accumulator at str. winch.
Automatic fairline driven from drum by stainless chain and chain wheels.
Quick realease of fairlaine driving knife.
Drum dimensions:
| D = |
500 mm |
| d = |
220 mm |
| L = |
400 mm |
| Pulling force 1. layer : |
2,6 ton at 220 bar |
| Pulling force last layer: |
1,3 ton at 220 bar |
| Average pulling speed : |
50 m/min at 59 litre/min |
| Brake power 1. layer : |
3,0 ton |
| Capacity 16 mm line : |
210 meter |
| Weight 130 kg |
|
1 off Lifting frame.
Single certified lifting frame with Henriksen hook fitting,
for safe lifting of vessel when winch is not fitted.
|
MB Hydraulikk AS - Mjosundet Båtbyggeri AS
