Vaagland Båtbyggeri AS
|
 |
Skrevet: 22.07.2010
MOB crane type MOB-2,8tm-400-B and Capstans type CA-2,0-220-AHB
5 off Capstan, type CA-2,0-220-AHB-SM
Delivered with flange for fitting on deck pedestal.
Built-in automatic hydraulic brake in wheel gear.
Dimensions of warping head:
| D = |
290 mm |
| d = |
220 mm |
| H = |
260 mm |
| Pulling force: |
2,0 tons at 180 bar |
| Pulling speed: |
20 m/min at 27 litres/min |
Maneuvre valve type PVG 32 for variable LS system.
1 off crane type MOB-2,8 tm-400-B
| Capacity: |
800 kg SWL, on 3,5 m arm |
| Length of arm: |
3,5 m |
| Slew: |
400o |
| Pulling force on winch: |
800 kg |
| Pulling speed: |
18 m/min |
| Slewing moment: |
SWL at 23o tilting |
| Oil requirement: |
18 litres/min |
| Pressure: |
140 bar |
| Material in pedestal, king post and crane boom: |
Seawater resistant aluminium |
| Material in bolts: |
Tempered stainless steel |
| Maneuvre valve: |
Valvoil |
| Weight of crane with winch: |
500 kg |
50 litre accumulator for MOB-arrangement
50 l accumulator enabling lifting of vessel from crib, slew and lower from dead ship condition.
For taking on board to dead ship, the accumulator must be charged from hand pump
in the case it was discharged at lowering.
Crane delivered with hand pump for manual control and brake release for lowering from dead
ship condition.
Crane delivered with accumulator fitted on crane for lowering of MOB-boat from MOB-boat.
Crane certified by DnV in accordance with the Marine directive, MED, SOLAS and IMO.
Crane delivered with MED F certificate and CE lable on wheel.
|
MB Hydraulikk AS - Mjosundet Båtbyggeri AS
