|
1 off thruster type: S-50-60-V60 with output 60 hp and
1 off thruster type: S-60-80-V80 with output 80 hp
Propellers in nikkelbronze and tunnels in aluminium
1 control panel for fitting in wheelhouse and 1 for fitting outside.
2 of Parker PV 130 cc Load Sense variable hydraulic pump with LS control for all hydraulics.
Delivered with pressure filter, return filter, security valve, manometer and cooler.
Working pressure 350 bar, delivers 2x190 l/min ved 15oo rpm.
Torque on single 130 pump approximately 750 Nm, torque on double pump 920 Nm.
1 of Tank Accessory:
Inspection glass and alarms for temperature and level for fitting on tank.
Alarmpanel for temperature/level of tank plus filterindicators from pressure and return filters.
Deck equipment.
1 off warping winch 1-AV-20,0 AHB in seawater resistant aluminium and stainless steel.
Fixed drum. Automatic hydraulic brake integrated in gear.
Delivered with over centre and maneuvre valve for variable pump, LS
Variable axial piston motor enables high pull at low speed and, high speed at low pull.
Automatic stepless regulated.
| Drum dimensions: |
D= |
1200 mm |
| |
d= |
320 mm |
| |
L= |
1500 mm |
| Drum capacity: |
600 m |
ø 48 mm rope. |
Pulling force/pulling speed
| Pulling force on first layer: |
19 tons at 250 bar |
| Pulling force on last layer: |
6,2 tons at 250 bar. |
| Brake force: |
22 tons |
|
Pulling speed on first layer:
Pulling speed on middle layer:
|
36 m/min motorvolum 35 cc and max flow
130l/min,
75/m/min which is average pulling speed.
|
|
MB Hydraulikk AS - Mjosundet Båtbyggeri AS
